DAEDALUS TECHNOLOGIES, INC.
MAKING TECHNOLOGY MORE ACCESSIBLE
Installing of the DAESSY Folding Mount - DFM2 and DFM2ROP
Installing the Quick Release Base
Remove the plastic plug retaining the Pinch Clamp in its hole in the TUSB and slide it onto the Horizontal Tube. The Pinch Clamp must be aligned in its hole so that it is even with the inside of the tube hole to allow the tube to slide through.
Quick Release Orientation:
The Total Quick Release Base can be clamped at any location along the Horizontal Tube and may be rotated around the tube to place the mounted device at any angle. The normal orientation for the TUSB is with the Locking Pin positioned away from the user. Adapters and Holders that attach devices and computers onto the TUSB are assembled for this orientation.
Steps in Installation Procedure:
Installing the DFM2 has these major steps:
- Identify the Parts
- Assemble and Install the Frame Clamp Components
- Install the Index Clamp and Vertical Tube
- Install the Folding Mechanism and Horizontal Tube
- Install the Quick Release Base
Folding Mount