DAEDALUS TECHNOLOGIES, INC.
MAKING TECHNOLOGY MORE ACCESSIBLE
DAESSY Mounting System
Standard Part Lists
The parts needed to assemble the Standard Mounting Assemblies are:
Rigid Mount - DRM1
STR-16 | Horizontal Tube, straight 16 " long. |
S-22x3 | Vertical Tube, S-bent 22" long with 3" offset |
TC90 | 90º Tube Connector |
UFCOP | Frame Clamp Outer Piece |
UFC1000IP | Frame Clamp Inner Piece for 1" diameter round tubing |
IC1 | Index Clamp |
TUSB | Quick Release Base |
Locking Swing-Away Mount - DLSA7
CABLE | Release cable assembly attached to tube |
RT-22x16 | Right-Angle Bent Tube 22" vertical by 16" horizontal |
LSAOP | Frame Clamp Outer Piece for Locking Swing-Away Mount |
UFC1000IP | Frame Clamp Inner Piece for 1" diameter round tubing |
O3L | Offset Link |
ICLSA | Locking Swing-Away Index Clamp |
TUSB | Quick Release Base |
Folding Mount - DFM2
STR-16 | Horizontal Tube, straight 16" long |
S-22x3 | Vertical Tube, S-bent 22" long with 3" offset |
RTH+2RTHTM | Folding Mechanism |
UFCOP | Frame Clamp Outer Piece |
UFC1000IP | Frame Clamp Inner Piece for 1" diameter round tubing |
IC1 | Index Clamp |
TUSB | Quick Release Base |
Rear Folding Mount - DRFM6
STR-16 | Horizontal tube, straight 16" long |
STR-22 | Side tube, straight 22" long |
ELRH+RTHTM | Elbow Rotate Head with Tube Mount |
RFA+RTHTM | Rear Folding Adapter with Tube Mount |
UFC1000IP | Frame Clamp Inner Piece for 1" diameter round |
O3L | Offset Link |
TUSB | Quick Release Base |
Lockable Rear Folding Mount - DLRFM8(L/R)
STR-16 | Horizontal tube, straight 16" long |
STR-22 | Side tube, straight 22" long |
ELRH+RTHTM | Elbow Rotate Head with Tube Mount |
LRFA+RTHTM+Lock(L/R) | Lockable Rear Folding Adapter with Tube Mount and Lock |
UFC1000IP | Frame Clamp Inner Piece for 1" diameter round |
O3L | Offset Link |
TUSB | Quick Release Base |
**When printing reduce font size to avoid missing data.**
* These are standard lengths and S-bends that are supplied when custom lengths are NOT ordered and the X and Y or T measurements are not given on the Purchase Order.
** When the size of tubing on the wheelchair is NOT stated in the Purchase Order a 1 inch Frame Clamp Inner Piece is supplied with adapter sleeves for 7/8 inch.
*** The Quick Release Plate and Adapter depends on the type of device that is attached to the mounting assembly.