DAEDALUS TECHNOLOGIES, INC.
MAKING TECHNOLOGY MORE ACCESSIBLE
Installing the DAESSY Rear Folding Mount - DRFM6
Steps in the Installation Procedure
- Identify the Parts
- Install the Frame Clamp Assembly, Rear Folding Adapter and Side Tube
- Install the Elbow Rotate Head, Horizontal Tube and Quick Release Base
- Set the Stop Pins in the Rear Folding Adapter
- Final Adjustments
The standard parts of the DAESSY Rear Folding Mount are listed below. Parts which may differ from situation to situation are indicated with a *.
|Part Code||Part Name|
|*UFCxxxxIP||Frame Clamp Inner Piece|
|RFA+RTHTM||Rear Folding Adapter with Tube Mount|
|ELRH+RTHTM||Elbow Rotate Head with Tube Mount|
|*TUSB||Total Quick Release Base.|
|STR16||Horizontal Tube. Straight 16” (Other lengths are available)|
|*STR22||Side Tube. Straight 22” (Other lengths are available)|
|*RFCR-RFCI||Optional additional Removable Frame Clamp Assembly|
All the black anodized aluminium components have a part code stamped into the metal. These should be identified and laid out.
The Frame Clamp Inner Piece (UFCxxxxIP) may not be exactly as shown, and additional Offset Links may be included.
The RFCR-RFCI Removable Frame Clamp Assembly is an optional additional component.
The Swivel Clamps for joining the Rear Folding Adapter, Offset Links and Frame Clamp Inner Piece are normally fastened into the holes in the RFA and O3L. The Pinch Clamps for securing the tubes into the Tube Mounts and the Total Quick Release are normally installed in their holes and retained by plastic plugs.
More than one Offset Link may be included, or there may be no Offset Link. A Frame Clamp Spacer may be included.
Specific installation instructions may be supplied with components, especially components that vary from the standard parts list. In the case of contradictory instructions, component specific instructions provided with the mounting components will supersede the installation procedures outlined here.
It is very important that all packaging be thoroughly inspected for loose parts and instruction papers. All the mount components must be identified and checked against the standard parts list, and the order list BEFORE any packaging is thrown away.
Rear Folding Mount