DAEDALUS TECHNOLOGIES, INC.
MAKING TECHNOLOGY MORE ACCESSIBLE
The DAESSY Swing Aside Mount - DSAM4
Swing Aside Mount DSAM4
The Swing Aside Mount combines the features of the original Locking Swing Away Mount (DLSA7) with the lockable frame clamp components ROP-RFCR for use on a tilt seat system. The mount can be swung away from the user by releasing the lock-pin connected to the cable that runs below the horizontal tube. The attached device or computer is connected to the horizontal tube across the wheelchair and supported by a vertical s-bend tube held in a frame clamp that is permanently attached to the wheelchair. Either left or right side installation is possible. The device may be quickly detached from the mount and the mount may be lifted completely out of the frame clamp. All common wheelchair frame tube sizes, shapes and orientations can be accommodated. Variations can be made in the length and shape of the vertical side tube, and in the frame clamp parts to adapt the mount for any wheelchair.
Information on the DAESSY Swing Aside Mount - DSAM4 is organized into the following sections:
- GO TO: Description
- GO TO: Parts List
- GO TO: Fitting the DSAM4
Before ordering a DAESSY Mounting System some information about the application must be collected:- Selecting a Frame Clamp location
- Measuring and Specifying the Frame Clamp size
- Determining the Vertical Tube length and shape
- GO TO: Installing the DSAM4 onto the wheelchair