DAESSY Mounting System
M-Series - "Mini" Wheelchair Mounting System
Mini Adjustable Mount - M75-AM
The Mini Adjustable Mount has several points of adjustment to setup and position the mount. Two rotating joints can be angled and twisted in numerous directions to adjust the 'horizontal' tube position. This mount is supported on the wheelchair by a Frame Clamp Assembly permanently attached to either the left or right side of the wheelchair.
The Frame Clamp Assembly is composed of a Frame Clamp Inner Piece and a Removable Frame Clamp Receiver (RFCR). The Inner Piece is clamped or bolted to the wheelchair frame while the Receiver holds the Vertical Tube.
The mounted device is attached to a quick release plate, either directly or with use of a specific adapter, and attached to the Horizontal Tube of the mount assembly by means of a Quick Release Base that secures the device and allows for quick detaching of the device from the mount.
The complete mount can be lifted out of the Frame Clamp Receiver and removed from the wheelchair leaving only the Frame Clamp Assembly attached to the wheelchair frame. Additionally, the mount can be swung away when the adjustable height clamp lock handle is loosened.
The Mini Adjustable Mount includes Real-time height adjustment of 9" (23cm), no tools necessary.
Height setup possible between 18" to 31" (46cm-79cm) from the Frame Clamp to 'horizontal' tube position.
The M-Series by DAESSY is a smaller, lightweight mount solution which may not be suitable for larger devices exceeding 10lbs or eye camera systems that require very tall setups.
When needing to support larger devices or requiring a taller setup refer to the DAESSY Positioner Mount (DPM9).
|UFCxxxxIP||Frame Clamp Inner Piece*|
|RFCR||Removable Frame Clamp Receiver|
|MTM75AM||Mini Adjustable Mount body|
|MQR75||Mini Quick Release Base M-Series*|
The size and shape of the required Frame Clamp Inner Piece must be specified with the order of a standard mount. The Frame Clamps section provides comprehensive information on DAESSY Frame Clamp options. When no specification is made for a particular Frame Clamp Inner Piece the UFC1000IP 1" standard is provided.
In addition to the standard and variation parts an adapter plate or device holder is necessary to complete the mount. The section Device Adapters and Holders provides comprehensive information.