DAESSY Mounting System
M-Series - "Mini" Wheelchair Mounting System
Mini Bent-Tube Mount - M75-BTM
The Mini Bent-Tube Mount is a basic mount assembly. A single right-angle bent tube provides a simple support for a communication device or computer.
The Mini Bent-Tube Mount is easily removed from the chair. The mount is non-directional and may be installed on either side of a wheelchair.
The Frame Clamp Assembly is composed of a Frame Clamp Inner Piece and a Removable Frame Clamp Receiver (RFCR). The Inner Piece is clamped or
bolted to the wheelchair frame while the Receiver holds the Vertical Tube.
The mounted device is attached to a quick release plate, either directly or with use of a specific adapter, and attached to the Horizontal Tube of the mount
assembly by means of a Quick Release Base that secures the device and allows for quick detaching of the device from the mount.
The complete mount can be lifted out of the Frame Clamp Receiver and removed from the wheelchair leaving only the Frame Clamp Assembly attached to the wheelchair frame.
Standard configuration dimensions: 24" vertical x 14" horizontal lengths (61cm x 35cm)
Optional tube lengths are available on request. Substitution may be made on the initial mount order at no additional charge. M75-BTM tubes are also available for purchase separately.
M75-BTM Optional tubes:
- Right-angle Bent Tube (vertical x horizontal)
- 20" x 14" (51cm x 35cm)
- 28" x 14" (71cm x 35cm)
- 32" x 14" (81cm x 35cm)
- 20" x 16" (51cm x 41cm)
- 24" x 16" (61cm x 41cm)
- 28" x 16" (71cm x 41cm)
- 32" x 16" (81cm x 41cm)
The M-Series by DAESSY is a smaller, lightweight mount solution which may not be suitable for larger devices exceeding 10lbs or eye camera systems that require very tall setups.
When needing to support larger devices or requiring a taller setup refer to the DAESSY Rigid Mount ROP (DRM1ROP).
|UFCxxxxIP||Frame Clamp Inner Piece*|
|RFCR||Removable Frame Clamp Receiver|
|M75FOP||Mini Frame Outer Piece|
|MQR75||Mini Quick Release Base M-Series*|
|M75RT-24x14||M-Series Bent Tube 24" x 14" length|
The size and shape of the required Frame Clamp Inner Piece must be specified with the order of a standard mount. The Frame Clamps section provides
comprehensive information on DAESSY Frame Clamp options. When no specification is made for a particular Frame Clamp Inner Piece
the UFC1000IP 1" standard is provided.
In addition to the standard and variation parts an adapter plate or device holder is necessary to complete the mount.
The section Device Adapters and Holders provides comprehensive information.