DAESSY Mounting System
M-Series - "Mini" Wheelchair Mounting System
Specifications
Materials:
Components - Anodized Aluminum
Tubes - 3/4" OD Stainless Steel
General specifications and options:
- Frame Clamp -
The standard configuration of a mount assembly includes the Frame Clamp Inner Piece 1" standard (UFC1000IP) for attachment to a wheelchair main-frame with round tube. Alternate clamps are available see Frame Clamp Inner Pieces for more information.
The M-series Frame Clamp uses the standard DAESSY inner pieces and the RFCR Removable Frame Clamp Receiver which allows the addition of optional parts such as Offset Links and Spacers. - Quick Release -
The standard configuration of a M-Series mount assembly includes the Mini Quick Release (MQR-75). An optional Articulating Quick Release (AQR-75) is available. The Articulating Quick Release provides the ability to change the angle and tilt of an attached computer/device.
Maximum computer/device weight: 10lbs (4.5Kg)
M-Series mount assemblies:
Mini Adjustable Mount - M75-AM
The Mini Adjustable Mount has several points of adjustment to setup and position the mount. Two rotating joints can be angled and twisted in numerous directions to adjust the 'horizontal' tube position. The Mini Adjustable Mount includes Real-time height adjustment of 9" (23cm), no tools necessary.
Height setup possible between 18" to 31" (46cm-79cm) from the Frame Clamp to 'horizontal' tube position.
M75-AM More Information & InstructionsMini Folding Mount - M75-FM
The Mini Folding Mount, as the name suggests, folds the horizontal tube down to the outside. The folding joint between the two mount tubes performs a 2-step folding sequence to bring the tubes parallel. When folded and removed from the chair the Mini Folding Mount is a more compact unit for storage.
Standard configuration dimensions: 14" (35cm) Horizontal Tube, 24"x6" offset (61cmx15cm offset) S-curve Side Tube
M75-FM More Information, Options & InstructionsMini Bent-Tube Mount - M75-BTM
The Mini Bent-Tube Mount is the most basic mount assembly. A single right-angle bent tube provides a simple support for a communication device or computer. The Mini Bent-Tube Mount is easily removed from the chair.
Standard configuration dimensions: 24" height x 14" horizontal bent-tube
M75-BTM More Information, Options & InstructionsThe M-Series by DAESSY is a smaller, lightweight mount solution which may not be suitable for larger devices exceeding 10lbs or eye camera systems that require very tall setups.